IAPWS95 {CHNOSZ} | R Documentation |
Calculate thermodynamic properties of water following the IAPWS-95 formulation.
IAPWS95(property, T = 298.15, rho = 1000)
property |
character, name(s) of property(s) to calculate |
T |
numeric, temperature (K) |
rho |
numeric, density (kg m^-3) |
IAPWS95
provides an implementation of the IAPWS-95 formulation for properties (including pressure) calculated as a function of temperature and density.
The IAPWS95
function returns values of thermodynamic properties in specific units (per gram).
The IAPWS-95 formulation follows the triple point convention used in engineering (values of internal energy and entropy are taken to be zero at the triple point).
For IAPWS95
the upper temperature limit of validity is 1000 °C, but extrapolation to much higher temperatures is possible (Wagner and Pruss, 2002).
Valid pressures are from the greater of zero bar or the melting pressure at temperature to 10000 bar (with the provision for extrapolation to more extreme conditions).
The function does not check these limits and will attempt calculations for any range of input parameters, but may return NA
for properties that fail to be calculated at given temperatures and pressures and/or produce warnings or even errors when problems are encountered.
A data frame the number of rows of which corresponds to the number of input temperature, pressure and/or density values.
Wagner, W. and Pruss, A. (2002) The IAPWS formulation 1995 for the thermodynamic properties of ordinary water substance for general and scientific use. J. Phys. Chem. Ref. Data 31, 387–535. https://doi.org/10.1063/1.1461829
util.water
for properties along the saturation curve (WP02.auxiliary
) and calculation of density from pressure and temperature (rho.IAPWS92
).
water.IAPWS95
is a wrapper around IAPWS95
and the utility functions, which converts the specific units to molar quantities, and is used in higher-level functions (water
).
## calculate pressure for given temperature, density IAPWS95("P", T=500, rho=838.0235)